COMAND Retrofit parts

This is a kit comprising of the parts to retrofit Linguatronic (voice activation) to the W220 S Class.

This is a kit comprising of the parts to retrofit Linguatronic (voice activation) to cars with NTG 1 or NTG 2 that has been retrofitted. Suitable for W169 A, W245 B, W203 C/CLC, W211 E, W219 CLS & R171 SLK. Suitable for pre model year 2009 cars only.

This is a kit comprising of the parts to retrofit Linguatronic (voice activation) to cars with NTG 2 comand that already have the buttons on the steering wheel. Suitable for W164 ML, X164 GL and W251 R class cars. Pre model year 2009 cars only.

This is a kit comprising of the parts to retrofit Linguatronic (voice activation) to cars with COMAND NTG 2.5 that has been retrofitted. Suitable for W169 A, W245 B, W203 C/CLC, W211 E, W219 CLS & R171 SLK, R230 SL & Vito/Viano/Sprinter.

These are the steering wheel button packs needed when adding linguatronic to a ML/GL/R class if the linguatronic buttons are not present on your steering wheel already. These are suitable for ML GL and R class with the rectangular steering wheel buttons, i.e before Model Year 2009.

This is the wiring adapter that you will need to install Comand into a W208 CLK (old shape) or W210 E class (old shape), pre MY05 W203 C, pre MY05 W209 CLK or older W463 G class and 2004/2005 W163 ML, or W163 ML not using the roof mounted GPS antenna

It contains the wiring for CD changer, steering wheel controls,and instrument cluster display. It allows you to plug your COMAND directly into the car's existing wiring. It is a simple plug and play part, but you will need to connect one wire in the adapter to the car's speed signal.

This is the wiring adapter that you will need to install Comand into a 2002 or 2003 ML, it contains the antenna wiring adapter, and the CD changer / reverse signal adapter.

These are genuine Mercedes Benz parts.

If you are trying to fit a COMAND 2.0 with part number A210 820 xx xx or A208 820 xx xx into a W163 ML or a car without CANbus, then you need this device which take's the car's ignition, lights and speed signals and makes the CANbus needed for the A210/A208 COMAND units.

It also includes the adapter leads to connect to the car's C connector and power the CD changer and wakeup signals for phone / BOSE sound system etc.

This is the wiring looms you need to add the 3.5mm auxiliary input to cars where COMAND 2.0 has been retrofitted or the vehicle has COMAND 2.0 but no AUX lead such as the W163 ML.

You will have to insert the wires on this loom into the C2 connector on your COMAND and drill a 19mm hole in the glovebox for the AUX input on the side nearest the COMAND.

This is a genuine Mercedes GPS antenna with the genuine adapter cable to connect it to the Blue GPS antenna connection on the rear of the COMAND-APS (DVD based and Hard Disk COMAND systems (NTG1, NTG2, NTG3, NTG4 and NTG2.5)

This is a genuine Mercedes GPS antenna with the a specially made adapter cable to connect it to the grey HRS connector on the COMAND 2.0 (CD based COMAND) system.

This is a genuine Mercedes GPS retrofit antenna for Audio-50-APS & DVD based / Hard Disk based COMAND systems (NTG1, NTG2, NTG3 and NTG2.5). Not suitable for W203 CLC or W204 C class, W207/W212 new E class.

This is the genuine Mercedes roof antenna for the Mercedes ML W163 2002-2005, post faceiift. I.e the last shape ML with the indicators in the mirrors.

It contains GPS & Phone antenna, and if you are fitting COMAND or Telephone to a facelifted ML this is the best antenna to use.

This antenna is for the newer Comand APS DVD based systems as found in the A/B/C/CLK/ML/GL/R/Vito/Viano range

This is not a genuine Mercedes item and hence is considerably cheaper. We do not beleive it is quite as good in built up (i.e low signal) areas.

This is the set of parts you need to convert a car or van with Audio-5, Audio-10, Audio-30 or COMAND 2.0 (CD based) to the wiring for NTG2.5 Hard Disk COMAND.

This is for vehicles with existing phone systems.

It is not suitable for cars with Harmon Karden or BOSE sound system.

This is the set of parts you need to convert a car or van with Audio-5, Audio-10, Audio-30 or COMAND 2.0 (CD based) to the wiring for NTG2.5 Hard Disk COMAND.

This is for vehicles without an existing Mercedes phone systems.

It is not suitable for cars with BOSE sound system.

This is the set of wiring adapters and bluetooth antenna you need to install the appropriate new Hard Disk based COMAND NTG2.5 into an A, B, CLC, ML, GL, R or Sprinter/Vito/Viano.

This is for vehicles with existing phone systems.

For cars with Harmon Karden sound system additional parts will be required.

This is the set of wiring adapters and bluetooth antenna you need to install the appropriate new Hard Disk based COMAND NTG2.5 into an A, B, CLC, ML, GL, R or Sprinter/Vito/Viano.

This is for vehicles WITHOUT existing phone systems.

For cars with Harmon Karden sound system additional parts will be required.

This is the set of wiring adapters and bluetooth antenna you need to install the new Hard Disk based COMAND NTG2.5 into an older R171 Mercedes SLK which has the Audio-20-Casette, Audio-50-APS or DVD based COMAND-APS for cars WITH an existing phone system.

It is not suitable for cars with Harmon Kardon sound system

This is the set of wiring adapters and bluetooth antenna you need to install the new Hard Disk based COMAND NTG2.5 into an older Mercedes SLK (R171) which has the Audio-50-APS or DVD based COMAND-APS for cars WITHOUT an existing phone system.

It is not suitable for cars with Harmon Kardon sound system

This is the wiring set you need to convert a W211 E or W219 CLS with Harmon Kardon sound system to NTG2.5 (Hard Disk) Comand.

You will also need to purchase a new Harmon Kardon main amplifier and Sub Woofer amplifier - see our other products for more details.

This is the set of wiring adapters and bluetooth antenna you need to install the new Hard Disk based COMAND NTG2.5 into an older W211 E class, W219 CLS class which has the Audio-20-Casette, Audio-50-APS or DVD based COMAND-APS for cars WITH an existing phone system.

It is not suitable for cars with Harmon Kardon sound system

This is the set of wiring adapters and bluetooth antenna you need to install the new Hard Disk based COMAND NTG2.5 into an older W211 E class, W219 CLS class which has the Audio-20-Casette, Audio-50-APS or DVD based COMAND-APS for cars WITHOUT an existing phone system.

It is not suitable for cars with Harmon Kardon sound system

This is the set of wiring adapters and bluetooth antenna you need to install the new Hard Disk based COMAND NTG2.5 into an older W211 E class, W219 CLS class, or R171 SLK with Audio-20-CD system - for cars already *with* the phone system.

This is the set of wiring adapters and bluetooth antenna you need to install the new Hard Disk based COMAND NTG2.5 into an older W211 E class, W219 CLS class, or R171 SLK with the Audio-20-CD and *without* an existing phone system.